The Univox 2a home induction loop system kit provides everything
required to help people who are hearing impaired hear the telly
or radio better. Very easy to install (can usually be installed
in less than an hour) simply by feeding a thin wire around the
room. This is then kept in place either by clipping to the skirting
board or by tucking under the carpet edge.
Induction loop system suitable for:
- lounges
- tv rooms
- in car or mobile home
Introduction
When a home induction loop system is installed people who
are hearing impaired can use the hearing aid set to the 'T'
position. The telecoil in the hearing aid picks up the magnetic
waves produced by the loop system. A direct copy of the audio
signal from the telly is now 'induced' in this coil and the
hearing aid converts this electrical signal back to audible
sound for the wearer to hear. In this way, someone sitting
in the lounge can clearly hear the telly free from background
noise - simply by being inside the loop area.
Home induction loop amplifier
The Univox 2a is a dedicated induction loop amplifier, covering
up to 30 square metres. The built in AGC circuit maintains
a clear and constant level of sound; this helps pre-vent the
hearing aid from distorting. To optimise sound quality the
home induction loop amplifier has AGC. It has been designed
to give a constant sound output to the loop. That means whatever
the TV, radio or hi-fi volume, the hearing aid user will receive
a constant level of clear sound with no background noise.
Please use our Selector below to help you choose the correct
induction loop kit for your application.
Home
Kit Selector
Our best seller!
Shopping trolley > click
here |
'click here' will redirect you to our
sister site diyloopsystems.co.uk.
|
TOP
|
