Key Features and Specifications
The mains smokie is very simple to install with a well labelled front panel making it simple to operate and test. It is a small, compact, fully monitored system operating on low safe voltages throughout. There is an installation on/off switch to isolate the unit during installation or if required after fitting.

• The unit comes fully assembled for easy installation. All terminals are readily accessible should any layout modifications be required.

• The system and wiring are continuously self monitored. The unit will go into alarm condition should a fault in the wiring occur (shortiopen).

• The mains power supply is continuously monitored. The green "mains on" indicator light will go to a warning red should the mains fail. The permanently recharged back up battery will then continue to safely power the unit.

• The sealed battery back up is automatically maintained in a fully charged condition and will continue to fully power the unit during a mains power failure.

• There is a built in 'low battery' test to monitor the condition of the battery during normal testing.

• A test button is fitted to fully test the safe operation of the system including the beacon and vibrator.

• The smoke detector is produced to BS 5446 Pt 1990. The unit plugs into a standard three pin mains power supply and conforms to British Standard 415 (1990).

• The unit is supplied with a powerful vibrating pad for use under a pillow and a high intensity flashing beacon to give alarm warning during day and night-time use.

• Both output sockets are locking giving permanent and secure connection to the unit. The first socket is monitored to ensure proper installation at all times.

• Full installation instructions are supplied with each unit.

• The unit is very compact 3.5 x 6 x 2.3 inches for surface or wall mounting.